HUSQVARNA 122LK
Valid 01/09/17 – 28/02/18, from participating Husqvarna authorised servicing dealers, while stocks last.
Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Easy Starting
Air purge for very easy starting.
Auto Return Stop Switch
Stop switch automatically resets to the ON position for trouble-free starting.
Intuitive Controls
The choke and purge are easy to reach and understand.
Tap 'n Go™ Trimmer Head
Twin line cutting system with Tap 'N Go™ for quick line feed.
Detachable Shaft
Detachable shaft for easy transport and storage.
Multi Purpose
Multi-purpose machine with several attachments available as accessories.
High Torque Bevel Gear
Bevel gear designed with high torque and the cutting equipment parallel to the ground for best cutting performance.
Technical Specifications
| Engine Specification | |
| Cylinder displacement | 1.32 cu.inch / 21.7 cm³ |
| Power output | 0.8 hp / 0.6 kW |
| Maximum power speed | 7800 rpm |
| Fuel tank volume | 10.14 fl oz / 0.3 lit |
| Fuel consumption | 630 g/kWh |
| Fuel consumption | 0.79 lbs/h / 0.36 kg/h |
| Idling speed | 2800 rpm |
| Spark plug | NGK CMR6A |
| Electrode gap | 0.02 " / 0.5 mm |
| Clutch engagement speed | 4200 rpm (±120 rpm) |
| Maximum rpm output shaft | 6850 rpm |
| Output shaft thread | M10x1.25V |
| Lubricants | |
| Lubricant type (bevel gear) | Mineral grease |
| Vibration & Noise Data | |
| Equivalent vibration level (ahv, eq) left | right handle / 3.6/3.5 m/s² |
| Sound pressure level at operators ear | 90 dB(A) |
| Sound power level, guaranteed (LWA) | 108 dB(A) |
| Overall Dimensions | |
| Weight (excl. cutting equipment) | 10.58 lbs / 4.8 kg |
| Transmission Data | |
| Gear ratio | 1:1.46 |
| Drive gear angle | 30 ° |
